Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Automatic Transmission/Transaxle
Model Year: 2008 Model: Sequoia Doc ID: RM000003F74000X
Title: AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: OIL COOLER: REMOVAL (2008 Sequoia)

REMOVAL

1. DRAIN ENGINE COOLANT 3UR-FE COOLING: COOLANT: REPLACEMENT (2008 Sequoia)+

2. REMOVE FRONT EXHAUST PIPE ASSEMBLY 3UR-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL (2008 Sequoia)+

3. DISCONNECT WATER BY-PASS PIPE ASSEMBLY

(a) Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler. Then separate the by-pass pipe from the automatic transmission.

HINT:

Use a container to catch any coolant which flows out of the water by-pass hoses.

4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)

(a) Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer.

(b) Separate the transmission oil cooler from the transmission oil cooler spacer.

(c) Remove the 4 O-rings.

5. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/ Trailer Towing System)

(a) Disconnect the 2 No. 2 transmission oil cooler hoses from the transmission oil thermostat.

(b) Remove the 3 bolts and transmission oil cooler with transmission oil thermostat.

(c) Separate the transmission oil cooler from the transmission oil thermostat.

(d) Remove the 4 O-rings.